|
AS 1172.1:2014
|
Water closets (WCs) Pans
|
|
AS 1172.2:2014
|
Water closets (WCs) Flushing devices and cistern inlet and outlet valves
|
|
AS 3571.1:2009
|
Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)
|
|
AS 3571.2:2009
|
Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
|
|
AS 4181:2013
|
Repair and off-take clamps for water industry purposes
|
|
AS/NZS 4441:2008
|
Oriented PVC (PVC-O) pipes for pressure applications
|
|
AS/NZS 2280:2014
|
Ductile iron pipes and fittings
|
|
AS/NZS 3518:2013
|
Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
|
|
AS 3879:2011
|
Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
|
|
AS/NZS 4401:2006
|
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
|
|
I.S. EN 13598-1:2010
|
Plastics Piping Systems for Non-pressure Underground Drainage and Sewerage - Unplasticised Poly(vinyl Chloride) (pvc-u), Polypropylene (pp) and Polyethylene (pe) - Part 1: Specifications for Ancillary Fittings Including Shallow Inspection Chambers
|
|
I.S. EN 295.1:2013
|
Vitrified Clay Pipe Systems for Drains and Sewers - Part 1: Requirements for Pipes, Fittings and Joints
|
|
ISO 15874.2:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
|
|
ISO 15874.3:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
|
|
ISO 15874.1:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General
|
|
AS 5200.007:2008
|
Plumbing and drainage products - Metal-bodied water hammer arresters
|
|
WMTS-463:2015
|
Pressure Attenuator
|
|
WMTS-517:2016
|
Offset Pan Connectors
|
|
AS 3688:2016
|
Water supply and gas systems - Metallic fittings and end connectors
|
|
WMTS-518:2016
|
Rehabilitation of existing Non Pressure Pipelines by the use of Cured In Place Pipe (CIPP)
|